New Baron Tools Heavy Duty 2 in 1 Hardwood Flooring Nailer/Stapler

This pneumatic flooring nailer is designed to install tongue and groove hardwood flooring with L-shaped cleat nails or staples.

- Uses nails from 1 1/2" to 2" in length and up to 16 gauge which can be used on flooring in thicknesses of 1/2", 5/8", 3/4" and 25/32"
- Uses staples from 1" to 2" in length and up to 15.5 gauge.
- Tool capacity is 92 staples and 100 nails
- Uses compressed air at pressures between 60 and 100 psi. and comes with a 1/4" male quick connector.
- Tool weight is 12 lbs.

New! Never Used in carry case, complete with;

Nailer
Hex keys
Wrench
Mallet
Oil
Safety Glasses
2 Different Sized Base Plates
O-Ring Repair Kit
Manual with Parts List

This Baron Tools heavy duty 2 in 1 hardwood flooring nailer/stapler has a 2 year warranty. 

I will include 5 boxes of 1000 cleats, That's 5000 nails for Free with the buy it now.

This was purchased 30 days ago for me to install my own Floor, I just don't have the time, so I am offering to you.

I will include 5 boxes of 1000 cleats, That's 5000 nails for Free with the buy it now. My loss is your gain.

-------------------------------------------
I M P O R T A N T !
PLEASE READ BELOW !
-------------------------------------------

I accept PayPal thru eBay or call 631-473-2507 for credit card processing which ever you prefer. All payments processed before 5pm eastern standard time will be shipped the same day. I WILL NOTIFY YOU BY E-MAIL WHEN I SHIP YOUR ITEM(S). This email will include your tracking number and information. Please remember to include your email address when you make your payment! Please make payment arrangements within seven (7) days of the closing date of purchase or forfeit the item(s). I file claims with eBay against all deadbeat buyers.) Thank you for your purchase and have a great day!

We accept payment via PayPal (American Express, Bank Transfer, Discover, MasterCard, Visa and PayPal Transfer) and credit cards. For credit card processing call 631-473-2507

Shipping is via UPS Ground unless otherwise stated. Free shipping is only in the 48 contiguous state, insurance is included. For Canadian / International buyers please email us for a shipping quote. Faster Shipping is available Please call for a Quote.

All Sales are Final

Home

Lynx hand held games, among the first and still the best.

Get the BIG picture. with LYNX Vision

LYNX to TV converter

New Estimated cost $199.00 Tabletop Version

Now Expected 2nd Quarter 2003 Pending FCC

The Prototypes are done, and have been shown at the WORLD OF ATARI 98 Show in Las Vegas.

Some Good Information:

7/6/99

Most problems encountered on the development of the table top version have been corrected as of July, we are expecting to have new Proto Types later this month.

4/1/99

2 New proto types have been delivered on a stand alone unit, they are currently under test, we will post both pictures as well as a delivery schedule as soon as possible.

1/15/99

We have been considering a tabletop version of Lynx Vision since the WOA98 show and begun development shortly after the show.

We have received several prototypes and are fine tuning their design. Keep posted for new details as they become available.

8/5/98 Support for both NTSC and PAL via a switch located on the PCB

Internal version:

The installation is now being finalized, currently requires removal of the rear cover and soldering in place a small Printed Circuit board over a group of 26 pins. Estimated installation time is 20 Minutes.

Full aspect ratio has been maintained.

Flip Screen Function implemented. for Left or Right Handed operation.*

We will be offering Installation in your existing LYNX Game, or purchase of a complete pre-modified game console.

Over the coming weeks we will announce the full features of this device as well as it being a fully internal unit or a combination of internal and external, TBD (to be determined)

Full internal installation will cause a slightly higher drain when using batteries.

Outputs:  1 output for Video RCA and 1 for Stereo audio.(mini jack for audio). A template will be provided to assist you in drilling the necessary holes to accommodate the Video RCA jack.

External, there are no ill effects, your Lynx will  maintain it's full functionality as it did before,  with the exception of the added TV output capabilities. There will still be a soldered PC board needed internally (you must install) and a DB15 cable that will connect your Lynx to the external box (the TV control unit). From this control unit you will have both Audio and Video cables attached to you TV/VCR or auxiliary inputs of your entertainment center.

* Flip function to be added in released version.

The image to the right is what we started with, over 100 discrete Integrated circuits.  What we will have will be less than 10 when the converter is completed.

With over 650 engineering hours already spent we are closing in on the completion of this new project, all in the attempt to make game playing more enjoyable.

External Design shown at WOA98. This model requires an adapter soldered into the Lynx game unit.

Internal Design requires soldering (fits inside Lynx Hand Held game